HW QCW Laser Welder 30% Electro-Optical Conversion Efficiency for Precision Parts
| Laser Type: | QCW Quasi-Continuous Fiber Laser | Rated Output Power: | 150W / 300W / 450W / 600W |
| Wavelength: | 1070nm ± 10% | Operation Modes: | QCW / PWM / CW Selectable |
| Beam Quality: | Constant Across Full Power Range | Electro-Optical Conversion Efficiency: | Up To 30% |
| High Light: | Constant Beam Quality Full Power Range,30% Electro-Optical Conversion Efficiency,Stable Output Energy Precision Welding |
||
This QCW quasi-continuous fiber laser welding machine is engineered for high-precision welding of small, thin and heat-sensitive components in the consumer electronics industry, including connectors, camera modules, battery tabs, shielding cases, sensor housings and micro metal parts. The quasi-continuous emission mode combines the high peak power of a pulsed laser with the smooth, deep penetration of a continuous laser, giving a clean, spatter-free weld bead with a very small heat affected zone.
The resonator maintains a stable beam parameter product and focus spot size from the lowest to the highest output setting. Because the focus diameter and energy distribution do not drift when power is raised, one single process recipe can be used across the whole working range. Weld width, penetration depth and bead appearance stay repeatable from the first part to the last part of a production batch, which greatly simplifies parameter tuning and shortens changeover time for new consumer electronics models.
The pump configuration and optical cavity design raise the electro-optical conversion efficiency to as much as 30%, well above conventional lamp-pumped solutions. Higher efficiency means lower power consumption for the same welding output, less heat generated inside the cabinet, lighter thermal load on the cooling system and a longer service life for the pump modules. The result is a lower cost per weld, a smaller carbon footprint and a machine that runs economically in continuous multi-shift production.
Closed-loop power feedback controls each pulse in real time, keeping output power and pulse energy within a narrow tolerance over long production runs. Stable energy per pulse means stable penetration depth and consistent weld strength, which is critical for micro welding of copper, nickel and stainless steel parts where a deviation of a few percent can cause cold joints or burn-through. The machine keeps this stability at low power settings as well as at full power.
Typical applications include welding of USB and Type-C connectors, camera and lens modules, vibration motors, relay contacts, battery tabs and busbars, sensor shells, micro switches, shielding frames and other high-precision accessories. The compact focus spot, low heat input and spatter-free process protect nearby plastic parts, coating layers and gold-plated contacts. The machine can be used as a stand-alone workstation or integrated into an automated production line with a galvanometer scanner, XY table or robot.
| Laser Type | QCW Quasi-Continuous Fiber Laser |
| Rated Output Power | 150W / 300W / 450W /600W (optional) |
| Wavelength | 1070nm ± 10% |
| Operation Modes | QCW / PWM / CW selectable |
| Electro-Optical Efficiency | Up to 30% |
| Cooling Method | Forced air cooling |
| Power Supply | AC220V , 50Hz |
| Application | High-precision welding of consumer electronics accessories |